四川省房屋数据空间化及在芦山7.0级地震灾情快速评估中的应用

在四川省城乡布局和经济分区的基础上,通过308个房屋数据抽样点(1 km×1 km)并结合土地利用数据,建立分类的房屋数据空间化模型。将其结果应用到芦山7.0级地震震例中,得到以下结论:灾区毁坏与严重破坏房屋数量591 077间,误差为4.1%;房屋直接经济损失估算259.6~300亿元,误差为4.5%~10.2%;死亡人数误差为26.0%~71.9%;受伤人数误差12.7%~22.3%。结果表明:提出的房屋空间化方法较好地体现了实际房屋分布情况,为建立大区域的房屋空间数据提供了途径。用该数据评估得到的灾区房屋倒损、人员伤亡、经济损失数据有较高的可信度。在此基础上以房屋倒损结构类型和面积为指标划分救援区域,为救援力量的合理部署提供依据。     

Application of different foliar iron fertilizers for enhancing the growth and antioxidant capacity of rice and minimizing cadmium accumulation

Environmental Science and Pollution Research - Iron (Fe) fertilizer can reduce cadmium (Cd) uptake and toxicity in rice, but the underlying mechanisms of Cd mitigation by different fertilizers are...     

Implications for emergency response to the severe odor incident occurred in source water: Potential odorants and control strategy

Environmental Science and Pollution Research - Sudden odor incidents occurring in the source water have been a severe problem for water suppliers. In order to apply emergency control measures...     

Potential ecological and health risk assessment of different kiwifruit orchards in Qianjiang district,Chongqing city,China

Environmental Science and Pollution Research - Heavy metal (HM) pollution in orchards is becoming serious in many countries, and some fruit HMs exceed the safety limits. In this study, contents of...     

Level and characteristics of polychlorinated dibenzo-p-dioxins and dibenzofurans in feed and feed additives

Feed security is a prerequisite for safe animal food products. In this study, 13 groups of feed and feed ingredients, totaling 2067 samples, were collected in the period of 2011 to 2014 from China. The highest mean level of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) was found in fish meals and shell powders, with a concentration of 60.35 ng/kg, followed by mineral origin materials. In terms of the toxicity equivalent concentration, the fish oil group showed the highest PCDD/F levels because of their bio-accumulation through the aquatic food chain, with an average concentration of 1.26 ng WHO-TEQ/kg, while the lowest level was observed in compound feed for chickens and pigs, with an average value of 0.16 ng WHO-TEQ/kg. OCDD and OCDF were the predominant congeners in all groups except fish oils, in which the primary congeners were 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF. For zinc chloride samples, different from other zinc-based compound samples, the main congeners were 1,2,3,4,6,7,8-HpCDF (17%), 1,2,3,4,7,8,9-HpCDF (15%), 1,2,3,4,7,8-HxCDF (12%) and OCDF (30%). Considering toxicity equivalency factors, the dominant congeners were 2,3,4,7,8-PeCDF, 1, 2,3,4,7,8-HxCDF, 2,3,7,8-TCDF and 1,2,3,7,8-PeCDD, and the contribution to the total TEQ was 29%, 16%, 14% and 12%, respectively. Overall, 2.1% (43 out of 2067) of all the analyzed samples exceeded the different individual ''European Union maximum limited levels for PCDD/Fs. This study is beneficial for the determination of the status of contamination levels of feed and feed ingredients.     

Photoelectrochemical performance of birnessite films and photoelectrocatalytic activity toward oxidation of phenol

Birnessite films on fluorine-doped tin oxide(FTO) coated glass were prepared by cathodic reduction of aqueous KMnO_4. The deposited birnessite films were characterized with X-ray diffraction, Raman spectroscopy, scanning electron microscopy and atomic force microscopy.The photoelectrochemical activity of birnessite films was investigated and a remarkable photocurrent in response to visible light was observed in the presence of phenol, resulting from localized manganese d–d transitions. Based on this result, the photoelectrocatalytic oxidation of phenol was investigated. Compared with phenol degradation by the electrochemical oxidation process or photocatalysis separately, a synergetic photoelectrocatalytic degradation effect was observed in the presence of the birnessite film coated FTO electrode.Photoelectrocatalytic degradation ratios were influenced by film thickness and initial phenol concentrations. Phenol degradation with the thinnest birnessite film and initial phenol concentration of 10 mg/L showed the highest efficiency of 91.4% after 8 hr. Meanwhile, the kinetics of phenol removal was fit well by the pseudofirst-order kinetic model.     

Kinetics of nitrobenzene degradation coupled to indigenous microorganism dissimilatory iron reduction stimulated by emulsified vegetable oil

Widespread contamination by nitrobenzene(NB) in sediments and groundwater requires better understanding of the biogeochemical removal process of the pollutant. NB degradation, coupled with dissimilatory iron reduction, is one of the most efficient pollutant removal methods. However, research on NB degradation coupled to indigenous microorganism dissimilatory iron reduction stimulated by electron donors is still experimental. A model for remediation in an actual polluted site does not currently exist.Therefore, in this study, the dynamics was derived from the Michaelis–Menten model(when the mass ratio of emulsified vegetable oil and NB reached the critical value 91:1). The effect of SO_4~(2-), NO_3~-, Ca~(2+)/Mg~(2+), and the grain size of aquifer media on the dynamics were studied, and the NB degradation dynamic model was then modified based on the most significant factors. Utilizing the model, the remediation time could be calculated in a contaminated site.     

Removal of Cs from water and soil by ammonium-pillared montmorillonite/Fe3O4 composite

To remove cesium ions from water and soil, a novel adsorbent was synthesized by following a one-step co-precipitation method and using non-toxic raw materials. By combining ammonium-pillared montmorillonite (MMT) and magnetic nanoparticles (Fe₃O₄), an MMT/Fe₃O₄ composite was prepared and characterized. The adsorbent exhibited high selectivity of Cs⁺ and could be rapidly separated from the mixed solution under an external magnetic field. Above all, the adsorbent had high removal efficiency in cesium-contaminated samples (water and soil) and also showed good recycling performance, indicating that the MMT/Fe₃O₄ composite could be widely applied to the remediation of cesium-contaminated environments. It was observed that the pH, solid/liquid ratio and initial concentration affected adsorption capacity. In the presence of coexisting ions, the adsorption capacity decreased in the order of Ca^2 + > Mg^2 + > K⁺ > Na⁺, which is consistent with our theoretical prediction. The adsorption behavior of this new adsorbent could be expressed by the pseudo-second-order model and Freundlich isotherm. In addition, the adsorption mechanism of Cs⁺ was NH₄⁺ ion exchange and surface hydroxyl group coordination, with the former being more predominant.     

Highly efficient Zr doped-TiO2/glass fiber photocatalyst and its performance in formaldehyde removal under visible light

Zr-doped-TiO_2 loaded glass fiber(ZT/GF) composite photocatalysts with different Zr/Ti ratios were prepared with a sol–gel process. Zr4+can replace Ti4+in the TiO_2 lattice, which is conducive to forming the anatase phase and reducing the calcination temperature. The glass fiber carrier was responsible for better dispersion and loading of Zr-doped-TiO_2 particles, improving the applicability of the Zr-doped-TiO_2. The ZT/GF photocatalysts were characterized by X-ray diffraction(XRD), scanning electron microscope(SEM), Fourier transform infrared spectroscopy(FT-IR), ultraviolet–visible spectroscopy(UV–vis) and Barrett–Joyner–Halenda(BJH). The performance of photocatalysts with different loading was evaluated in formaldehyde degradation under visible light at room temperature. ZT/GF0.2exhibited the highest activity, with a formaldehyde removal rate as high as 95.14% being observed, which is better than that of the photocatalyst particles alone. The stability of the catalyst was also tested, and ZT/GF exhibited excellent catalytic performance with 94.38%removal efficiency, even after seven uses.     

Fe(Ⅲ)/丙酮酸钠体系光解过程中生成的 Fe(Ⅱ)浓度和·OH的浓度变化

以日光灯和金属卤化物灯为主要光源,以Fe(Ⅲ)/丙酮酸钠体系光化学过程中产生的Fe(Ⅱ)和·OH为主要检测对象,探讨了Fe(Ⅲ)/丙酮酸钠体系光解过程中生成的Fe(Ⅱ)和·OH的浓度变化.结果表明,Fe(Ⅲ)/丙酮酸钠体系的光解过程不仅能产生Fe(Ⅱ)和·OH;在丙酮酸钠过量的情况下,光解过程还存在着Fe(Ⅲ)/Fe (Ⅱ)的循环;Fe(Ⅱ)浓度和·OH累积浓度均在pH 3.00时最大;体系的光化学过程中会伴随pH的升高;初始Fe(Ⅲ)浓度和初始丙酮酸钠浓度的提高都有利于Fe(Ⅱ)浓度和·OH累积浓度的提高.